Bondo Lightweight Filller, Ultralight 234D + Hardener, 1 Kit
- Part Number xxx
- 3M ID 7000111812
Details
Highlights
- Soft, creamy texture
- Excellent to spread
- Easy Sanding
- Sand time 20 minutes when mixed with 2% hardener by weight @ 25°C
- Not intended for structural or load-bearing repairs
3M™ bondo Ultimate Easy Sanding Body Filler 234D is a two-component, polyester-based lightweight body filler that is vacuum processed to provide a soft, creamy texture with excellent spread ability. It cures quickly and delivers easy sanding and good surface finish characteristics.
Use 3M™ bondo Ultimate Easy Sanding Body Filler 234D for most car repairs, where cosmetic dent filling is required. It is designed for cosmetic automotive body repair to fill dents, dings, gouges and surface imperfections on bare steel, galvanized steel, aluminum, sheet molded compound (SMC) and fiberglass reinforced polyester (FRP).
Typical Properties
Resources
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labelled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labelled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards, as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
