3M™ Speedglas™ Welding Helmet 9100 FX Air with filter 9100XX and 3M™ Adflo™ Powered Air Respirator, 547725

• Combined eye, face and powered air respiratory protection
• Nominal Protection Factor 500 (TH3)
• Comes with 3M™ Speedglas™ Welding Helmet 9100 FX-Air, welding filter and 3M™ Adflo™ Powered Air Respirator
• 3M™ Speedglas™ Welding Filter 9100XX offers variable dark shades of 5, 8 and 9-13 for most types of arc welding
• Welding filter viewing area: 73 mm x 107 mm
• Protective visor viewing area: 170 mm x 100 mm
• Delay settings allow you to extend the recovery delay of the welding filter from dark to light, according to welding method
• Light-to-dark switching time of 0.1 ms
• 3M™ Adflo™ Powered Air Respirator helps protect you against both particles and gases in one system
• Gas filters and odour filters are sold separately.
• The slim profile and ergonomic design make it lightweight and suitable for tight welding spaces
• When using 3M™ Adflo™ PAPR with gas filter configuration we recommend using 3M™ Breathing Tube with Silencer, 834009, and 3M™ Heavy-Duty Battery, 837631

3M™ Speedglas™ Welding Helmet 9100 FX-Air, with welding filter 9100XX and 3M™ Adflo™ Powered Air Respirator, 547725 offers eye, face and respiratory protection with a flip-up welding filter combined with a big (170 mm x 100 mm), clear protective visor.

For respiratory protection and excellent vision in a flip-up model, get 3M™ Speedglas™ Welding Helmet 9100 FX Air, with welding filter and 3M™ Adflo™ Powered Air Respirator, 547725. Our welding helmet combines a flip-up welding filter 9100XX (73 mm x 107 mm) with a wide, clear (170 mm x 100 mm) protective visor beneath that’s excellent for precision grinding in low-light conditions. It features side windows (shade 5 filters) can help widen your field of vision when wearing the helmet in the down position. 3M™ Speedglas™ Welding Filter Series 9100 continues our tradition of outstanding optical quality, including uniform shading and minimal distortion across the entire filter viewing area. The welding filter 9100XX has seven variable dark shades (5, 8 and 9-13) for most types of arc welding and a viewing area of 73 mm x 107 mm, made for the professional welder. The delay function sets the welding filter dark-to-light opening time, and it’s possible to lock-in any shade, e.g. in light state 3 when grinding. It has a switching time (light-dark) of 0.1 ms, and the sensitivity of the arc detection can be adjusted for reliable switching. The tack welding comfort mode may help reduce eye fatigue as the welding filter uses an intermediate shade 5 light state to help minimize eye strain during extended tack welding applications. If an arc is not struck within 2 seconds the welding filter will switch back to its normal light state (shade 3). 3M™ Adflo™ Powered Air Respirator comes with self-adjusting QRS breathing tube, prefilter, spark arrestor, particle filter, standard battery and charger. Filters for gas protection or odour filtration can be added as needed (sold separately). Each filter can be selectively without changing all filters at the same time. The slim profile and ergonomic design make it even more lightweight and easier to get into tight welding spaces. When using the Adflo™ respirator with gas filter we recommend using the breathing tube with silencer (834009) and the heavy-duty battery (837631).

Suggested Applications

• Use for welding applications